Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > DOWELING/ JIGS AND ACCESSORIES
Choose a sub category (or use the Search Icon above):
PLUG CUTTERS DOWEL CENTERS & ACCESSORIES POCKET HOLE JIGS & CONNECTORS
PLATE JOINER ACCESSORIES
Sort By:
1 2
Kreg P-PNT Pocket Hole Plug Kreg DDS Driver Combination Set Kreg SPS-F1 100 Pocket Hole Screw
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. Features a solid one-piece construction, magnetic tip, and complete quick-change compatibility. Deep #2 driver resists cam-out. Includes one of each: 3" and 6". For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
BISCUIT WOOD WRKG NO0 50/PK   General Tools 888 Dowel Center Set General Tools S838 Drill Stop Set
Wooden fibre biscuits for joining wood work together. Expands when used with a water based glue. Ideal for medium size furniture, cabinet, trim and special woodworking projects.? Made from nickel-plated steel and used for accurate match and transfer of dowel holes. Includes: (2) two each: 1/4", 5/16", 3/8? and 1/2". Used for depth control when drilling with twist and brad point drill bits. Made of cold rolled steel with black oxide finish. Includes (1) one each: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", hex wrench and reusable snap blister.
Kreg P-OAK Pocket Hole Plug Kreg P-MAP Pocket Hole Plug Kreg Jig D6HD Replacement Driver Bit
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. 6'' driver with deep #3 square drive. Optimized for use with Kreg Jig HD screws. Solid one-piece construction, magnetic tip, and complete quick-change compatibility for fast and easy bit changes.
Kreg P-PIN Wood Peg SCRW DOWEL 3/16X2IN ZN        BISCUIT PLATE JOINER NO 10
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick. For wood railing and stair. Use for joints where strength is critical; biscuits swell in joints for maximum strength.
BISCUIT PLATE JOINER NO 20    SCREW NO8 COARSE 1-1/4 250CT  Kreg KMA3210 Shelf Pin Jig Drill Bit
Use for joints where strength is critical; biscuits swell in joints for maximum strength. Coarse-thread for use with soft/plywoods. For indoor use. Zinc coated. Maxi-Loc screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. A good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection. High-speed steel construction with ultra-sharp brad point tip. Drills smooth holes fast. For use with the 1/4" Kreg Shelf Pin Jig.
CUTTER PLUG STEEL 1/4IN       PLUG CUTTER 3/8               CUTTER PLUG 1/2IN DIA
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank. Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank. Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank.
PLUG CUTTER 5/8IN             Kreg MKJKIT Mini Pocket Hole Jig Kit BIT CUTTER PLUG TAPERED 3/8IN
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank. For application where the smallest jig possible is required. Unlimited material thickness. Fenceless design allows you to make precise angle and stock depth adjustments. Hardened-steel drill guide. Glass-reinforced Nylon Body. Plug-setting guide helps to fully seat wood plugs. Works with a variety of common clamps or any Kreg Face Clamp. 1/2" to unlimited screw centering ability. Kit includes the Kreg Jig Mini, stepped drill bit, depth collar, and allen wrench. 3/8" shank, The new Task  Barracuda" tapered plug cutter makes a perfect plug every time, even in oversized holes.
Kreg Jig QUIK-Bit Kreg SML-F125S5-100 Pocket Hole Screw Kreg SML-C125S5-100 Pocket Hole Screw
For Kreg Joinery and use with any Kreg Jig. Features a 1/4" hex shank and compatibility with quick-change chuck. Can also be used with any manual Kreg Jig. Provides protection for indirect maritime applications and other exceedingly corrosive environments. Provides protection for indirect maritime applications and other exceedingly corrosive environments.
Kreg Jig KJDHD Replacement Drill Bit Kreg SML-C250S5-50 Pocket Hole Screw Kreg Tool QUIK-KIT Pocket-Hole Kit
For use with Kreg Jig HD. Features a 1/4'' hex shank and compatibility with quick-change chuck and standard chucks. Drills a HD 1/2'' diam. pocket hole. One-piece, hardened steel, rugged design. Includes stop collar and allen wrench. Provides protection for indirect maritime applications and other exceedingly corrosive environments. Provides everything needed to switch from drilling pocket holes to driving pocket screws. Includes quick-change chuck, a 6" #2 square driver, 3/8" hex-shank pocket-hole drill, allen wrench, and depth collar.
Kreg KMA3220  Deck Jig Kits Kreg R3 Pocket Hole System SCREW NO8 COARSE 1-1/4 1200CT
Six hardened-steel drill guides. Removable, dual-position fence. Standard 32mm hole spacing. Includes 5mm drill bit. Included locating pin for fast, accurate registration. Built-in storage for locating pin, drill bit and depth collar. Features two independent positioning sliders, nine individual depth settings, two wood chip relief holes, and hardened-steel drill guides. 7/8" drill guide spacing. Works with with a wide variety of clamps. Face Clamp for clamp pad adapter. 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8" and 1-1/2" screw centering ability. Kit contains Kreg Jig Jr., clamp adapter, stepped drill bit, 6" driver bit, depth collar, allen wrench, starter screw set, instruction manual, and carrying case. Coarse-thread for use with soft/plywoods. For indoor use. Zinc coated. Maxi-Loc screws have a large head that provides maximum bearing surface as the screw pulls tight in the pocket. A good choice for a wide variety of indoor projects with limited exposure to the elements. Zinc screws provide adequate rust protection.
   
 
1 2