|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline Valve Elbow, Specifications: 3/4 x 3/4 in, Plastic, White
|
Waterline Heater Drain Tube, Specifications: 3/4 in MPT, Dimensions: 42 in L
|
GSW Element Gasket, Specifications: Square Flanged, Gray
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GSW Heater Drain Valve, Plastic, White
|
1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
Oatey? plastic water heater pans can be installed under electric water heaters to protect from water damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GSW Element Wrench, Dimensions: 5 in L x 1-1/2 in Dia
|
Oatey plastic water heater pans can be installed under electric water heaters to protect from water damage. Available with 1-1/2 in PVC drain fittings to allow for connection to indirect drain.
|
Oatey? plastic water heater pans can be installed under electric water heaters to protect from water damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GSW Screw-In Water Heater Dip Tube, Specifications: 3/4 in Size, NPT Connection, Polysulfone, Dimensions: 55 in L
|
Watts Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Operating Pressure: 125 psi, Body Material: Bronze
|
Watts Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Operating Pressure: 150 psi, Body Material: Bronze, Dimensions: 1-3/4 in L x 3-1/2 in W x 1-1/8 in H, Suitable for: Water Heaters up to 105,000 BTU/hr
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SharkBite 22604LF water heater kit 1/2 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.
|
GSW Water Heater Thermostat, Temperature Setting Range: 150 deg F, Switching Type: Single-Throw
|
Series N36 water service vacuum relief valves are used in water heater/tank applications to automatically allow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the system and damage water heater/tank equipment. They have a brass body construction with NPT male inlet connection and a protective cap. Series N36 has a low profile design, is tested and rated to ANSI Z21.22 and is CSA certified. It is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks, table top heaters, jacketed steam kettles, unit heaters, low pressure steam systems and steam coil heaters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts Temperature and Pressure Relief Valve, Nominal Size: 3/8 in, Body Material: Bronze, Dimensions: 12-7/8 in L x 7-1/2 in W x 8-7/8 in H, Suitable for: Water Heaters up to 100,000 BTU/hr
|
SharkBite 22441LF water heater kit 3/4 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.
|
GSW Water Heater Element, 120 V, Wattage Rating: 1500 W, Copper
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 3L pressure relief valves are used in residential applications to protect against excessive pressure on domestic storage tanks, tankless water heaters and solar heating applications. They have a bronze body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring and test lever. Model 3L-Z9 has a stainless steel lever and pin for outside solar applications. ANSI Z21.22 approved, ASME rated and design certified and listed by CSA. Can be used with Watts Series 210 gas shutoff valve.
|
Watts Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, Male x Female Connection, Body Material: Bronze, Dimensions: 3-1/2 in H x 1-7/8 in W, Temperature Rating: 210 deg F
|
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 Btu/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating and a test lever. It is suitable for water heaters with up to 2 in (50.8 mm) of insulation. It is ASME rated and CSA listed. The temperature relief is 210 deg F (99 deg C), the pressure relief range is 75 to 150 psi (5.2 to 10.3 BARs) and the standard pressure setting is 150 psi (10.55 BAR).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Watts Pressure Relief Valve, Nominal Size: 3/4 in, Body Material: Bronze
|
GSW Water Heater Element, 240 V, Wattage Rating: 3000/2255 W, Copper
|
GSW Water Heater Thermostat, Temperature Setting Range: 150 deg F, Switching Type: High-Limit, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GSW Water Heater Element, 240 V, Wattage Rating: 3000/2255 W, Copper, Includes: Universal Square Flange
|
GSW Water Heater Element with Universal Square Flange, 208/240 V, Wattage Rating: 1500/1125 W, Copper
|
GSW Water Heater Element, 120 V, Wattage Rating: 1500 W, Copper, Includes: Screws, Round and Square Gaskets, Universal Square Flange
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GSW Anode Rod, Aluminum, Gray, Dimensions: 33 in L
|
GSW Water Heater Element with Universal Square Flange, 208/240 V, Wattage Rating: 3800/2850 W, Copper
|
GSW Water Heater Element, 240 V, Wattage Rating: 4500/3375 W, Copper, Includes: Universal Square Flange
|
|
|
