|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Air Duct, 1/2 in ID, 4 in OD, 10 ft L, Vinyl, White
|
Imperial Air Duct, 3 in OD, 10 ft Length, Vinyl, White
|
DUNDAS JAFINE's ProVent? bathroom fan vent kit is ideal for bathroom fan venting applications that require a wall style installation. The kit includes a 4 in ProVent? exhaust hood, a 4 in x 5 ft vinyl duct, a 3 to 4 in foam adapter and two plastic adjustable clamps. The ProVent? exhaust hood features three louver damper system that helps to prevent cold air backdraft, snow or rain from entering the home. The louvers are cammed to allow for easy pivoting and to help prevent sticking. Additional features include a recessed caulk line to assist in a clean caulking application and a snap-on pipe to cap assembly that eliminates the need for lint trapping staples all ProVent? products have a UV-resistant coating to prevent the cap from discoloring and are paintable to match the exterior of your home. These hoods can be used in conjunction with brick, concrete or siding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DUNDAS JAFINE's flexible white vinyl duct is ideal for general purpose exhaust applications including bathroom fan venting and surface mounted humidifier units.
|
Dundas Jafine's flexible white vinyl duct is ideal for general purpose exhaust applications including bathroom fan venting and surface mounted humidifier units.
|
Imperial Exhaust/Intake Hood, Duct Size: 3 in, Hood Material: Galvanized Steel, Hood Color: White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial R2 Series Exhaust/Intake Hood, Galvanized Steel Hood, White Hood, Includes: Damper, Screen
|
Dundas Jafine's flexible aluminum foil duct is ideal for bathroom fan venting and other general-purpose exhaust applications. This duct is made from three-ply aluminum foil laminate with a maximum operating temperature of 250 deg F.
|
Dundas Jafine's flexible aluminum foil duct is ideal for bathroom fan venting and other general-purpose exhaust applications. This duct is made from three-ply aluminum foil laminate with a maximum operating temperature of 250 deg F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's flexible aluminum foil duct is ideal for bathroom fan venting and other general-purpose exhaust applications. This duct is made from three-ply aluminum foil laminate with a maximum operating temperature of 250 deg F.
|
Dundas Jafine's flexible aluminum foil duct is ideal for bathroom fan venting and other general-purpose exhaust applications. This duct is made from three-ply aluminum foil laminate with a maximum operating temperature of 250 deg F.
|
One-piece polymeric wheel. White polymeric grill. Dimensions 11 in x 10-1/2 in. High-impact polycarbonate lens. 100 W maximum, type A19, medium base bulb, (not included). Rated Type IC for ceilings insulated to R-40. Plastic collar for 4 in duct connection, comes complete with built-in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified. Fan and light can be wired to operate separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
At the highest point the grill projects only 1/2 in down from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation at the minimum sound. Easily installed using the adjustable hanging brackets for 16 in centers. Motors are suitable for continuous operation. 4 in plastic duct collar with back draft damper. UL listed for installation over a tub or shower on a GFCI circuit. HVI2100 Certified.
|
Grill is 13-1/2 in Dia. Ribbed frosted glass light lens. 2 to 60 W maximum, type A19, medium base bulbs, bulbs not included. One-piece polymeric wheel. Plastic duct collar for 4 in duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated Type IC for ceilings insulated to R-40. UL listed. HVI2100 Certified.
|
Low profile grill almost disappears into ceiling and a motor with a large, quiet, centrifugal blower wheel. Provides lowest possible HVI certified sound rating. Install using the four included adjustable hanging brackets. Motors are suitable for continuous operation, 6 in round duct connector with a spring-loaded metal damper. For use over a tub or shower when installed on a GFCI circuit. Side access panel allows wiring fan from inside or outside the housing. Complies with ASHRAE 62.2 the minimum national standard, has three main components source control, local exhaust and whole house ventilation. Housing size of 12-7/8 x 12-3/4 x 9-7/8 in.
|
|
|
