Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > GRINDING/ CUT-OFF WHEELS & ACC
Choose a sub category (or use the Search Icon above):
CUT-OFF WHEELS - MASONRY CUT-OFF WHEELS - METAL DEPRESSED CENTER WHEEL-MASONRY
DEPRESSED CENTER WHEEL - METAL GRINDER CUP GRINDING WHEELS ANGLE GRINDER WIRE CUP BRUSHES
ANGLE GRINDER WIRE BRUSHES ANGLE GRINDER FLAP DISCS ANGLE GRINDER SANDING DISCS
ANGLE GRINDER BACKING PADS ANGLE GRINDER ACCESSORIES BENCH GRINDER WHEELS & ACCESS
Sort By:
1 2
DISC FLP 4.5INX5/8-11ARB 40GRT DISC FLP 4.5INX5/8-11ARB 60GRT DISC FLAP 4X5/8IN 60GRIT
Norton Flap Disc, 3X, High Performance, 4-1/2 in Diameter, 5/8-11 Arbor/Shank, 40 Grit, Zirconia Abrasive, Cloth Backing, Resin Bond, Applicable Materials: Metal, For Blending Welds, Cleaning, Stripping and Finishing Norton Flap Disc, 3X, High Performance, 4-1/2 in Diameter, 5/8-11 Arbor/Shank, 60 Grit, Zirconia Abrasive, Cloth Backing, Resin Bond, Applicable Materials: Metal, For Blending Welds, Cleaning, Stripping and Finishing Dewalt Flap Disc, Type 29, High Performance, Coated, 4 in Diameter, 5/8 in Arbor/Shank, 60 Grit, Grade: Medium, Zirconium Aluminum Oxide Abrasive, Fiberglass Backing, 15200 rpm Maximum, For Weld Blending, Removing Weld Slag
DSK FLAP 4-1/2IN 40GRT        DSK FLAP 4-1/2IN 60GRT        DSK FLAP 4-1/2IN 80GRT
TASK Abrasive Flap Disc, 5 in Dia, 80 Grit, Zirconia Alumina Abrasive, 12200 rpm Maximum, 7/8 in Shank, Applicable Materials: Ferrous and Non-Ferrous Metals, For Intermediate and Finishing Welds, Deburring, Rust Removal and Surface Finishing TASK Abrasive Flap Disc, 4-1/2 in Dia, 60 Grit, Zirconia Alumina Abrasive, 13300 rpm Maximum, 7/8 in Shank, Applicable Materials: Ferrous and Non-Ferrous Metals, For Intermediate and Finishing Welds, Deburring, Rust Removal and Surface Finishing TASK Abrasive Flap Disc, 4-1/2 in Dia, 80 Grit, Zirconia Alumina Abrasive, 13300 rpm Maximum, 7/8 in Shank, Applicable Materials: Ferrous and Non-Ferrous Metals, For Intermediate and Finishing Welds, Deburring, Rust Removal and Surface Finishing
FLAP DISC 5IN DIAMETER        FLAP WHEEL GRIND 36GRT 4-1/2IN DISC FLP 4.5INX5/8-11ARB 60GRT
DeWalt Abrasive Flap Disc, Series: High Performance, Type 29, Coated, 5 in Dia, 60 Grit, Medium Grade, Zirconia Alumina Abrasive, 12200 rpm Maximum, 7/8 in Shank, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z60 Teeth, For Weld Blending, Removing Weld Slag, Surface Finishing and Preparation , Deburring, Edge Blending and Chamfering DeWalt Abrasive Flap Disc, Series: High Performance, Type 29, Coated, 4-1/2 in Dia, 36 Grit, Very Coarse Grade, Zirconia Alumina Abrasive, 13300 rpm Maximum, 5/8-11 Shank, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z60 Teeth DeWalt Abrasive Flap Disc, Series: High Performance, Type 29, Coated, 4-1/2 in Dia, 60 Grit, Medium Grade, Zirconia Alumina Abrasive, 13300 rpm Maximum, 5/8-11 Shank, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z60 Teeth
DISC FLAP TYPE29 40GRIT 4.5IN DISC FLAP TYPE29 60GRIT 4.5IN DISC FLAP TYPE29 80GRIT 4.5IN
Forney Industries Flap Disc, Type 29, Circular Shape, Depressed Center, 4-1/2 in Diameter, 40 Grit, Grade: Medium, Alumina Zirconium Abrasive, 13500 rpm Maximum, 7/8 in Shank, Blue, Applicable Materials: Stainless Steel and Ferrous Metal, For Rough or Fine Finishing Forney Industries Flap Disc, Type 29, Circular Shape, Depressed Center, 4-1/2 in Diameter, 60 Grit, Grade: Medium, Alumina Zirconium Abrasive, 13500 rpm Maximum, 7/8 in Shank, Blue, Applicable Materials: Stainless Steel and Ferrous Metal, For Rough or Fine Finishing Forney Industries Flap Disc, Type 29, Circular Shape, Depressed Center, 4-1/2 in Diameter, 80 Grit, Grade: Fine, Alumina Zirconium Abrasive, 13500 rpm Maximum, 7/8 in Shank, Blue, Applicable Materials: Stainless Steel and Ferrous Metal, For Rough or Fine Finishing
WHL GRIND FLAP 4-1/2IN        DISC FLAP 4-1/2X7/8IN 60GRIT  DISC FLP 4.5INX5/8-11ARB 80GRT
DeWalt Abrasive Flap Disc, Type 29, Coated, 4-1/2 in Dia, 120 Grit, Fine Grade, Zirconia Alumina Abrasive, 13300 rpm Maximum, 5/8-11 Shank, Dark Gray/Yellow, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z60 Teeth, For Weld Blending, Removing Weld Slag, Surface Finishing and Preparation , Deburring, Edge Blending and Chamfering DeWalt Abrasive Flap Disc, Series: High Performance, Type 29, Coated, 4-1/2 in Dia, 60 Grit, Medium Grade, Zirconia Alumina Abrasive, 13300 rpm Maximum, 7/8 in Shank, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z60 Teeth DeWalt Abrasive Flap Disc, Series: High Performance, Type 29, Coated, 4-1/2 in Dia, 80 Grit, Medium Grade, Zirconia Alumina Abrasive, 13300 rpm Maximum, 5/8-11 Shank, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z60 Teeth
DISC FLAP 4-1/2X7/8IN 80GRIT  DISC FLAP 4-1/2X7/8IN 120GRIT WHL GRIND FLAP 4-1/2IN
Dewalt Flap Disc, Type 29, High Performance, Coated, 4-1/2 in Diameter, 7/8 in Arbor/Shank, 80 Grit, Grade: Medium, Zirconium Aluminum Oxide Abrasive, Fiberglass Backing, 13300 rpm Maximum, For Weld Blending, Removing Weld Slag Dewalt Flap Disc, Type 29, High Performance, Coated, 4-1/2 in Diameter, 7/8 in Arbor/Shank, 120 Grit, Grade: Fine, Zirconium Aluminum Oxide Abrasive, Fiberglass Backing, 13300 rpm Maximum, For Weld Blending, Removing Weld Slag DeWalt Abrasive Flap Disc, Series: High Performance, Type 27, Coated, 4-1/2 in Dia, 80 Grit, Medium Grade, Zirconia Alumina Abrasive, 13300 rpm Maximum, 7/8 in Shank, Applicable Materials: Carbon Steels, Aerospace Alloys, Nickel Alloys, Aluminum, Cast Iron, Forgings and Some Stainless Steel, Z80 Teeth
DSK SNDG PLT 4-1/2IN          WRENCH SPANNER DELUXE-SAND PAD BRSH WIRE 2-3/4IN CRS CRMP
DSK SNDG PLT 4-1/2IN
Our Price: $16.99
Supports 4 1/2" fibre back sanding disc when grinding with angle grinder. Forney Industries Spanner Wrench, Adjustable, For Sanding Pads, Grinding Wheels and Cut-Off Wheels TASK Wire Brush, Crimp Cup, 2-3/4 in Trim, Steel Trim, Usage: For Rust Removal, Deburring and Weld Cleaning
BRSH WIRE 2-3/4INCRS 1/4INSHNK BRUSH CUP WIRE KNOT 2-3/4IN   WHEEL GRIND COARSE 6IN ALOX
TASK Wire Brush, Knotted Cup, 2-3/4 in Trim, Steel Trim, Usage: For Rust Removal, Deburring and Weld Cleaning Forney Industries Crimped Wire Cup Brush, Knot, 2-3/4 in Diameter, 5/8 - 11 in Arbor, 0.014 in Wire, 14000 rpm Maximum, For Fast, Heavy Duty Cleaning of Large Surfaces, Removing Weld Scale, Rust, Burrs, Use in High Speed Air and Electric Tools, Both Portable and Stationary Machines Norton Grinding Wheel, Type 1, Straight, 6 in Diameter, 3/4 in Thickness, 1/2 in Arbor/Shank, Grade: Coarse, Aluminum Oxide Abrasive, 4140 rpm Maximum, Used on all Bench and Pedestal Mounted Grinders
WHL GRIND 6IN MTL 3/4IN THRD  WHL GRIND MED 6IN 3/4IN       WHEEL GRIND MEDIUM ALOX 6IN
Task Grinding Wheel, 6 in Diameter, 3/4 in Thickness, 1 in Arbor/Shank, 80 Grit, Grade: Medium, Aluminum Oxide Abrasive, 4450 rpm Maximum, Gray, Applicable Materials: Cast Iron, Stone, Glass, Rubber and Non Ferrous Metals, Metals, Rubber and Plastic, For General Grinding of All Metals, Harpening Carbide Tools, Saws, Lathe Tools, Milling Cutters and Masonry Drill Bits Norton Grinding Wheel, Type 1, Straight, 6 in Diameter, 3/4 in Thickness, 1 in Arbor/Shank, Grade: Medium, Aluminum Oxide Abrasive, Vitrified Bond, 4140 rpm Maximum, Applicable Materials: Metal, For Offhand Deburring, Sharpening and Shaping Norton Grinding Wheel, Type 1, Straight, 6 in Diameter, 1 in Thickness, 1 in Arbor/Shank, Grade: Medium, Aluminum Oxide Abrasive, 4140 rpm Maximum, Applicable Materials: Metal, For Offhand Deburring, Sharpening, Shaping
BLD SAW CIR 2-3/4IN CUP       BRUSH WIRE WHEEL KNOT 4X.012IN PAD BACKING STL REIN 4-1/2IN
Norton Circular Saw Blade, 2-3/4 in Dia Forney Industries Wire Wheel Brush, Twist Knot, 4 in Diameter, 5/8 - 11 in Arbor, 0.02 in Wire, 20000 rpm Maximum, For Removing Weld Scale, Spatter and Heavy Corrosion and For Heavy Duty Cleaning Applications For use with 4 1/2" (11,3cm) abrasive discs.  For all 4 1/2" (11,3cm) and 5" (12,7cm) angle grinders with 5/8"-11 (15,9mm-11)) spindles.  Maximum RPM 10,000.  Contains:  1 rubber backing pad and 1 disc nut.  Carded.
   
 
1 2