Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > STOVES & ACCESSORIES > PELLET STOVES
Sort By:
1
STOVE PELLET NON-ELEC 40000BTU STOVE PELLET 2000SQFT 48000BTU STOVE PELLET WL MOUNT 24000BTU
The GW1949 Wiseway from US Stove eliminates the need for electricity by utilizing a natural gravity feed system that eliminates all of the typical electrical and mechanical parts found in traditional pellet heaters. This patented revolutionary design is the only EPA certified and UL listed non-electric pellet stove on the market today. The Wiseway is simple to start and operate. Simply heat the burn chamber and flue with a propane torch and start the pellet flow. This stove uses a natural draft that will take over and ramp the stove up to temperature. Adjustments are simple by opening and closing fresh air intakes on the front of the stove. The window allows you to see the flame traveling up the body of the stove. Since it uses no electricity, heat is radiated off the 3.5 in tubing and the steel baffles on the back. Best of all, this stove offers extremely small clearances on the rear and sides making it easy to install. Impressively, since it does not use any electricity this stove is the perfect source of heat for areas that are prone to blackouts or off the grid installations. Good things come in small packages and this pellet stove is sure to continue that tradition. By combining a full size burning system with a small cabinet and hopper, this stove combines the best of both worlds. It can heat up to 2200 sq-ft yet its small footprint and clearances allow it to fit easily into smaller areas. Upgraded digital controls with a remote control make this stove easy to adjust. The ceramic glass window comes with an air wash system to keep the fire viewable. The 20 lb hopper provides up to 13 hr of burn time and because of its size, you will get fewer auger jams due to collapsed pellets. Pellet heaters work by using a software driven control board to precisely deliver a pre determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. US Stove Pellet Stove, Heating Capacity: 24,000 Btu, Burn Time: 3/4 to 2-1/2 lb/hr, 36 in W, 27 in H, 12.43 in D
STOVE PELLET W/HOPPER 2500SQFT STOVE PELLET 2000SQFT 52000BTU
The AP130 is a fully automated pellet stove with auto ignition and easy to use electronic controls. It comes with an exhaust blower for negative draft that pulls flue products through and out to completely eliminate smoke spillage and an automatic circulation blower to spread heat evenly. Has an optional fresh air intake that is sold separately. It's durable yet sleek design is built for years of high-performance and to blend nicely with any room setting and designed to provide your home with the desired warmth even in the coldest of climates. This stove burns a carbon-neutral, green fuel, considered environmentally friendly. Heating your home with this unit insures that you are doing your part to conserve our nation's primary energy resources. Pellet heaters work by using a software driven control board to precisely deliver a pre-determined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable-speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home. First introduced in 2001 as our first multi-fuel stove, The American Harvest stove has evolved into one of the most sophisticated heating appliances on the market. Not only is it capable of burning compressed wood pellets, it can also burn corn, soy beans, cherry pits, olive pits, bio mass fuel grains and processed palletized silage with just a few simple adjustments. The American Harvest is mobile home approved if used with a with use of fresh air kit and is extremely easy to install. Pellet heaters work by using a software driven control board to precisely deliver a predetermined amount of fuel from the hopper into a burn chamber. An electric heating element, used only in startup, heats the pellets until they ignite. The combustion blower forces air through the burn chamber and once ignited, it provides an active combustion of the pellets resulting in very little ash. The exhaust and heat pass through one side of air chambers where on the other side, the variable speed room blower gathers the heat and distributes this through the room. This entire process results in a very clean burning, efficient heating machine for your home.
   
 
1